GCXONE · Geräte
Teltonika-GPS Tracker
Vehicle GPS Tracking and Monitoring for GCXONE
Always Visible. Always Protected.
The Teltonika-GPS device type brings automobile and vehicle tracking to GCXONE. Built around the Teltonika FMC003, a compact GPS tracking terminal installed via a vehicle’s OBD-II port, it gives operators real-time visibility into vehicle location, movement, and operating condition, with alarm rules that turn incoming telemetry into actionable events without manual JSON editing.
Wichtigste Funktionen
- Real-time vehicle location and movement tracking, visible directly in GCXONE
- Six ready-to-use alarm rule types covering speed, battery, signal, route, geofence, and connectivity
- Simple two-field setup: IMEI Number and API Key, with no manual JSON configuration needed
- Automatic event handling: alerts clear and restore on their own as conditions return to normal
- Built-in battery backup keeps the tracker reporting briefly if disconnected from vehicle power
Typische Einsatzfälle
- Fleet and vehicle location monitoring for security and logistics operators
- Overspeed detection and driver behavior monitoring
- Battery and vehicle electrical health monitoring
- Geofence and route compliance monitoring for scheduled or restricted-area operations
Performance at a glance
6
Alarm rule types
5
System architecture layers
2
Setup fields required
3
GNSS systems supported
Rule
Speed Limit
- Alerts when vehicle speed exceeds a configured maximum
- The speed threshold is fully configurable per vehicle or deployment
Rule
Battery, Voltage & Current
- Alerts when battery voltage, battery current, or external voltage falls outside a configured range
- Minimum and maximum thresholds are configurable per deployment
Rule
GSM Signal Level
- Alerts when signal strength drops below a configured minimum
- The minimum signal threshold is configurable per deployment
Rule
Route Deviation
- Alerts when a vehicle strays beyond a configured distance from a selected route
- The route and deviation distance are configurable per deployment
Rule
Geo-Fence
- Alerts when a vehicle moves outside a configured geographic boundary
- The boundary radius is configurable per deployment
Rule
Offline Timeout
- Alerts when no communication is received from the tracker within a configured time window
- The timeout window is configurable per deployment
Picking a route on the map
A geofence with a 50 m radius
Getting started
Configured directly as a device type in GCXONE — no separate app subscription required.
- 01Install the trackerMount the Teltonika FMC003 via the vehicle’s OBD-II port
- 02Add the deviceIn GCXONE, add a Teltonika-GPS device using its IMEI Number and API Key
- 03Configure alarm rulesOpen the Rules tab and enable the rules relevant to the deployment
- 04Verify communicationConfirm the tracker is reporting data and rule evaluation is active
Auf einen Blick
- Tracker Model
- Teltonika FMC003
- Installation
- OBD-II connector; port location varies by vehicle make and model
- Power Supply
- Vehicle 10-30V DC, with an internal Li-Ion battery backup
- Field Layer
- The Teltonika FMC003 tracker, installed in the vehicle, collects GPS and supported vehicle telemetry.
- Communication Layer
- The tracker transmits data using the configured SIM card and mobile network.
- Network Layer
- Data is routed over the internet to the configured GCXONE server address and TCP port.
- Application Layer
- GCXONE receives the data, identifies the device, processes telemetry, stores it for monitoring, and evaluates it against the enabled alarm rules.
- Presentation Layer
- Operators view vehicle location, tracker status, telemetry, and communication status in GCXONE, with generated events available for response.
- Required Setup Fields
- IMEI Number, API Key
- GNSS Sources
- GLONASS, GPS, Galileo
- Monitored Telemetry
- Vehicle location and movement, speed, battery voltage and current, external voltage, GSM signal level, and communication status
- Event Generation
- Automatic, using assigned event codes and group codes
- CMS Notification Channels
- Evalink, AmWin, Lisa, IMMIX, and others
- Event Lifecycle
- Alerts automatically clear and restore when parameters return to their normal range
- Licensing
- Configured directly as a device type in GCXONE; no separate marketplace subscription is required
Hardware
System Architecture
Configuration
Monitoring & Events
Governance & Limitations